British Journal of Oral and Maxillofacial Surgery
Volume 45, Issue 7 , Pages 548-552 , October 2007

Histological examination of drill sites in bovine rib bone after grinding in vitro with eight different devices

  • F.G. Draenert

      Affiliations

    • Clinic for Craniomaxillofacial Surgery, University of Munich, Lindwurmstr. 2a, 80336 Munich, Germany
    • Corresponding Author InformationCorresponding author at: Clinic for Cranimaxillofacial Surgery, Lindwurmstr.2a, 80337 Munich, Germany. Tel.: +49 89 5160 2911; fax: +49 89 5160 2925.
    • ,
  • R. Mathys Jr.

      Affiliations

    • Dr. h.c. Robert Mathys Stiftung, Güterstr. 5, 2544 Bettlach, Switzerland
    • ,
  • M. Ehrenfeld

      Affiliations

    • Clinic for Craniomaxillofacial Surgery, University of Munich, Lindwurmstr. 2a, 80336 Munich, Germany
    • ,
  • Y. Draenert

      Affiliations

    • Center for Orthopaedic Research (ZOW), Gabriel-Max-Str. 3, 81545 Munich, Germany
    • ,
  • K. Draenert

      Affiliations

    • Center for Orthopaedic Research (ZOW), Gabriel-Max-Str. 3, 81545 Munich, Germany

,Accepted 20 December 2006.

References 

  1. Craig FS. Vertebral-body biopsy. J Bone Joint Surg. 1956;38(A):93–102
  2. Siffert RS, Arkin AM. Trephine biopsy of bone with special reference to the lumbar vertebral bodies. J Bone Joint Surg. 1949;31(A):146–149
  3. Eggers G, Klein J, Blank J, Hassfeld S. Piezosurgery®: an ultrasound device for cutting bone and its use and limitations in maxillofacial surgery. Br J Oral Maxillofac Surg. 2004;42:451–453
  4. Deeley TJ. The drill biopsy of bone lesions. Clin Radiol. 1972;23:536–540
  5. DeBoer DK. Advantages of milling versus broaching the proximal femur. Orthopedics. 2005;28(Suppl.):s1041–s1044
  6. Koch JP, Dunson B. Factors affecting bone healing following implant surgery. J Oral Implantol. 1996;22:7–11
  7. Saha S, Pal S, Albright JA. Surgical drilling: design and performance of an improved drill. J Biomech Eng. 1982;104:245–252
  8. Kordas G, Szabo JS, Hangody L. The effect of drill-hole length on the primary stability of osteochondral grafts in mosaicplasty. Orthopedics. 2005;28:401–404
  9. Evans PJ, Miniaci A, Hurtig MB. Manual punch versus power harvesting of osteochondral grafts. Arthroscopy. 2004;20:306–310
  10. Cloward RB. Treatment of acute fractures and fracture dislocations of the cervical spine by vertebral body fusion. A report of 11 cases. J Neurosurg. 1961;18:201–209
  11. Moholkar K, Taylor D, O’Reagan M, Fenelon G. A biomechanical analysis of four different methods of harvesting bone-patellar tendon-bone graft in porcine knees. J Bone Joint Surg. 2002;84(A):1782–1787
  12. Chacon GE, Bower DL, Larsen PE, McGlumphy EA, Beck FM. Heat production by 3 implant drill systems after repeated drilling and sterilization. J Oral Maxillofac Surg. 2006;64:265–269
  13. Ercoli C, Funkenbusch PD, Lee HJ, Moss ME, Graser GN. The influence of drill wear on cutting efficiency and heat production during osteotomy preparation for dental implants: a study of drill durability. Int J Oral Maxillofac Implants. 2004;19:335–349
  14. Cordioli G, Majzoub Z. Heat generation during implant site preparation: an in vitro study. Int J Oral Maxillofac Implants. 1997;12:186–193
  15. Natali C, Ingle P, Dowell J. Orthopaedic bone drills-can they be improved? Temperature changes near the drilling face. J Bone Joint Surg. 1996;78(Br):357–362
  16. Federspil PA, Plinkert B, Plinkert PK. Experimental robotic milling in skull-base surgery. Comput Aided Surg. 2003;8:42–48
  17. Allan W, Williams ED, Kerawala CJ. Effects of repeated drill use on temperature of bone during preparation for osteosynthesis self-tapping screws. Br J Oral Maxillofac Surg. 2005;43:314–319
  18. Piska M, Yang L, Reed M, Saleh M. Drilling efficiency and temperature elevation of three types of Kirschner-wire point. J Bone Joint Surg. 2002;84(Br):137–140
  19. Benington IC, Biagioni PA, Crossey PJ, Hussey DL, Sheridan S, Lamey PJ. Temperature changes in bovine mandibular bone during implant site preparation: an assessment using infra-red thermography. J Dent. 1996;24:263–267
  20. Brisman DL. The effect of speed, pressure, and time on bone temperature during the drilling of implant sites. Int J Oral Maxillofac Implants. 1996;11:35–37
  21. Harris BH, Kohles SS. Effects of mechanical and thermal fatigue on dental drill performance. Int J Oral Maxillofac Implants. 2001;16:819–826
  22. Hobkirk JA, Rusiniak K. Investigation of variable factors in drilling bone. J Oral Surg. 1977;35:968–973
  23. Draenert K, Draenert Y. Eine neue Methode fuer Knochenbiopsien und Knorpel-Knochentransplantation [A new procedure for bone biopsies and cartilage and bone transplantation]. Sandorama. 1987;3:254–269
  24. Bain BJ. Bone marrow trephine biopsy. J Clin Pathol. 2001;54:737–742
  25. Matthews LS, Green CA, Goldstein SA. The thermal effects of skeletal fixation-pin insertion in bone. J Bone Joint Surg. 1984;66(A):1077–1083

PII: S0266-4356(07)00004-6

doi: 10.1016/j.bjoms.2006.12.007

British Journal of Oral and Maxillofacial Surgery
Volume 45, Issue 7 , Pages 548-552 , October 2007

Article Tools

* Image Usage & Resolution